PP thin-wall food container
- Typical need
- Low-odor color, thin-wall dispersion, anti-fog or stiffness direction
- Useful input
- PP grade, molding temperature, part thickness, sample and test method
Application Solutions
Move from the finished product and process to the right material discussion
A product name alone is not enough to select a masterbatch or modified material. These application routes show what information should be confirmed before sampling.
Six Application Routes
Choose the closest processing situation
If your product does not fit exactly, use the nearest route and describe the difference in the inquiry.
PP sheet and thermoforming
- Typical need
- Sheet stiffness, stable forming, surface and dimensional stability
- Useful input
- PP grade, sheet thickness, forming equipment, temperature and current formulation
Protective and packaging film
- Typical need
- Color dispersion, gel control, anti-block, tack, slip, matte or PPA direction
- Useful input
- Resin, layer structure, film thickness, filter, equipment and defect sample
Custom plastic color
- Typical need
- Black, white or custom color matched to the intended resin and process
- Useful input
- Physical sample or color code, resin, process, thickness and surface finish
3D printing filament development
- Typical need
- PLA/PETG modification, filament color, silk effect or toughness direction
- Useful input
- Material, extrusion equipment, diameter, print parameters and target sample
Modified plastic part
- Typical need
- Virgin or recycled material route matched to mechanical and processing targets
- Useful input
- Polymer, part use, process, target test, appearance and current failure
Project Input
Six facts that make the first technical discussion useful
You do not need to disclose confidential formulas. These practical facts are usually enough to organize a sampling plan.
Material
Base resin, supplier grade, virgin or recycled route and current formulation where available.
Process
Equipment type, temperature, speed, film or part thickness and downstream operation.
Final product
Finished article, use environment, destination market and product life cycle.
Current problem
Defect sample, photo, test result, when the issue appears and its current frequency.
Target
Color sample, functional target, mechanical target or agreed comparison standard.
Validation
Customer method, third-party test, sample size, trial quantity and acceptance criteria.
Validation Sequence
Keep the trial result linked to its conditions
This prevents a result from one resin, dosage or process from being incorrectly reused as a universal conclusion.
- 1
Record the starting resin, formulation and current result
- 2
Define one clear trial target and acceptance method
- 3
Prepare the proposed sample and dosage range
- 4
Run the trial under recorded equipment and process conditions
- 5
Evaluate the finished article, not only the pellet appearance
- 6
Keep the approved sample and report scope linked to the product model
Have a processing problem but not a product name?
Send the material, process, finished product, problem sample and target. We can start from the application instead of forcing it into the wrong category.
Submit the Application